Turbocharger turbo manufacturers tell you how to do if the turbocharger end oil seal fails?
Turbocharger turbo manufacturers tell you how to do if the turbocharger end oil seal fails?
Turbocharger manufacturers tell you how to do if the oil seal at the turbo end of the supercharger fails? If the turbo end oil seal failure, the exhaust gas will enter the engine lubrication system through the seal ring, over time, the oil will fail prematurely, in addition, when the engine is running at low speed oil will also enter the exhaust pipe through the seal ring, from the exhaust pipe discharge discharge, resulting in the exhaust pipe smoke phenomenon; if the compressor end oil seal failure, the oil in the supercharger will flee into the compressor housing, along with the intake air was sucked into the cylinder combustion, resulting in excessive oil consumption, resulting in "burning oil" phenomenon. Cause excessive oil consumption, resulting in the phenomenon of "burning oil", in serious cases will also cause the cylinder to increase carbon.
Turbocharger rotor shaft and its bearings with a very precise, if the oil is too dirty or degraded, will be impurities or abrasive particles into the supercharger, light to accelerate the bearing wear, heavy rotor shaft and bearing bite. Therefore, the oil must be changed regularly, in each oil change, Z good oil filter together with the replacement.
As we all know, the turbocharger engine is to rely on fuel combustion in the cylinder to produce power, due to the amount of input fuel is limited by the amount of air inhaled into the cylinder, so the power generated by the engine will also be limited, if the engine's operating performance has been in Z good condition, and then increase the output power can only be increased by compressing more air into the cylinder to increase the amount of fuel, thereby improving the combustion to do work capacity The engine can only be increased by compressing more air into the cylinders to increase the amount of fuel, thus increasing the combustion power. Therefore, under current technical conditions, the supercharger turbine is the only mechanical device that can increase the output power of the engine with the same efficiency.
